Ricoh Neptune-P1 Service Manual page 58

Securing the Power Cord
1. Clean the rear plate [1] with alcohol.
2. Attach the harness clamp [2].
3. Clamp the power cord [3] to the roll feeder ( x 1).
Installing the Paper Rolls
If you will install the optional paper cassette (see p.61 "Paper Cassette (B853)"), do this before you
install the paper rolls.
If you do not install the paper cassette first, you must remove Roll 2 before you can install the optional
paper cassette.
• To install the paper rolls, follow the instructions on the decal on the top edge of the roll feeder drawer.
Roll Feeder (B852)
1
57