Ricoh Neptune-P1 Service Manual page 28

13. While you lift the main machine by its handle [3], set screw
and tighten it.
14. Tighten screws and
15. Do the above procedure again for the left joint bracket [4].
• The guide plate and screws are provided as accessories with the Roll Feeder (B852).
16. Install the guide plate [1] ( x 2 Blue). Hang the hooks on each end to position the plate for correct
installation.
• The movable guide plates are provided as accessories with the Roll Feeder.
17. Attach the movable guide plates [1] (x6).
.
Main Machine Installation (G180)
in the lower hole of the keyhole cutout
1
27