Ricoh Neptune-P1 Service Manual page 366

These SP's total the finishing methods. The finishing method is specified by the application.
P:FIN Jobs
8064
These SP's total finishing methods for print jobs only. The finishing method is specified by the
application.
O:FIN Jobs Not Used
8067
These SP's total finishing methods for jobs executed by an external application, over the
network. The finishing method is specified by the application.
806x 1 Sort
806x 2 Stack
806x 3 Staple
806x 4 Booklet
806x 5 Z-Fold
806x 6 Punch
806x 7 Other
T:Jobs/PGS
8071
These SP's count the number of jobs broken down by the number of pages in the job,
regardless of which application was used.
P:Jobs/PGS
8074
These SP's count and calculate the number of print jobs by size based on the number of
pages in the job.
O:Jobs/PGS
8077
These SP's count and calculate the number of "Other" application jobs (Web Image Moni
to r, Palm 2, etc.) by size based on the number of pages in the job.
807x 1 1 Page
807x 2 2 Pages
Number of jobs started in Sort mode.
Number of jobs started in Sort mode.
Number of jobs started in Staple mode.
Number of jobs started in Booklet mode. If the machine is in staple mode, the
Staple counter also increments.
Number of jobs started In any mode other than the Booklet mode and set for
folding (Z-fold).
Number of jobs started in Punch mode. When Punch is set for a print job, the
P: counter increments. (See SP8064 6.)
Reserved. Not used.
807x 8
807x 9
[0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]
21 to 50 Pages
51 to 100 Pages
SP8-xxx Data Log 2
5
365