Ricoh Neptune-P1 Service Manual page 295

5. Service Tables
Coverage Counter
5056
This SP switches the counter list for the system administrator on/off.
5101 Timer Setting
005 Panel Off Level
This SP sets the level of the low power mode, where the operation panel will switch off after
the machine enters low power mode.
[0 to 4/3/1]
0: Level 1 – 190°C (374°F)
1: Level 2 – 180°C (356°F)
2: Level 3 – 170°C (338°F)
5
3: Level 4 – 155°C (311°F)
104 Lower Power Set
This SP switches the low power mode off/no.
[0 to 1/1/1]
1: Off
0: On
Note: This is an energy save feature, but it is unrelated to compliance with any standard. In
this mode the fusing temperature is lowered and only the LCD goes off. One of several levels
can be selected with SP5101-005 (see above).
5169 CE Login
This SP enables and disables the CE log in mode. With this SP enabled, the machine is in the
CE (Customer Engineer/Service Technician) login mode.
In the CE login mode:
• The machine power can be turned off and on in the SP mode, and it will remain in the
• This SP is automatically reset to "0" (disabled) after the service technician closes the SP
Set Time DFU
5302
Sets the time clock for the local time. This setting is done at the factory before delivery. The
setting is GMT expressed in minutes.
294
SP mode after power is restored.
mode with the [End] soft button.