Ricoh Neptune-P1 Service Manual page 61

1. Installation
4. [] or []> Display the desired paper size.
5. [] or []> Select the size in the left or right column> [OK]> "Programmed"
6. [] or []> "Paper Type: Tray 1"> [OK]
1
7. [] or []> Select the desired paper type.
• "Plain Paper" is the default setting. This setting is not required if plain paper is loaded in the paper
feed source.
• No Display (Plain Paper)
• Recycled Paper
• Translucent Paper
• Film
8. [OK]> "Programmed". The display returns to the previous level, so that you can do more settings.
9. Repeat this procedure for other paper feed sources.
• Paper Size: Tray 2, Paper Type: Tray 2 (Roll 2)
10. [Menu]> Standby mode
60