Ricoh Neptune-P1 Service Manual page 345

5. Service Tables
Use these SP's to adjust operation of the fold plates inside the fan folder of the Folder unit.
1 FPlM Mvt:LE
This SP adjusts how far the fold plates descend to guide the leading edge.
[-200 to +200/0/1]
Note:
• An adjustment of 1 step is equivalent to 0.191 mm.
• An adjustment in the "+" direction moves the fold plates closer to the fan fold rollers, and
an adjustment in the "-" direction moves them away from the fan fold rollers.
2 FPl Mvt
This SP adjusts how far the fold plates descend to push the paper between the fan fold rollers
to form the folds.
5
[-400 to +400/0/1]
Note:
• An adjustment of 1 step is equivalent to 0.191 mm.
• An adjustment in the "+" direction moves the fold plates closer to the fan fold rollers, and
an adjustment in the "-" direction moves them away from the fan fold rollers.
11 FPl Stp:LE
This SP adjusts when the fold plates pause on the downstroke at the lowest point near the fan
fold rollers after the leading edge of the paper has entered the fan folder mechanism.
[-100 to 500/0/10 ms]
Note: An adjustment in the "+" direction sets a longer time, and an adjustment in the "-" direction
sets a shorter time.
12 FPL Stp:Fold
This SP adjusts the how long the fold plates pause on the down stroke at its lowest point near
the fan fold rollers.
[-100 to 500/0/10 ms]
Note: An adjustment in the "+" direction sets a longer time, and an adjustment in the "-" direction
sets a shorter time.
21 FPl Tmg:LE
This SP adjusts the distance the paper feeds past the fan folder entrance sensor (the sensor goes
ON) before the fold plate starts to descend.
[-70 to 70/0/0.1 mm]
344
Fold Plate Movement : Leading Edge
Fold Plate Movement
Fold Plate Halt : Leading Edge
Fold Plate Halt : Folding
Fold Plate Timing : Leading Edge