Ricoh Neptune-P1 Service Manual page 343

5. Service Tables
76 PnDrive CL
6961 FU:TprtM Adj DFU
1 FolderM Rot DFU
This SP adjusts the line-speed of the Folder unit transport motor. The transport motor drives all
the timing belts that turn the rollers in the paper feed path.
[-10 to +10/0/1%]
Note: At "0", the motor runs at normal speed. Adjustment in the "+" direction increases speed,
and in the "-" direction it decreases speed.
6962 FF:FoldM Adj DFU
5
Use these SP's to adjust the fan motor speed to correct skew and offset at the Folder unit entrance.
The fan fold motor drives both pairs of fan fold rollers at the bottom of the Folder unit.
1 Disp Ppr L
This SP displays the length of the paper most recently fed into and folded in the Folder unit.
[0 to 32767 mm]
One of two sensors detects the leading edge and trailing edge of the paper, and calculates
the paper length based on the length of time for the paper to pass below:
• On line mode. The Folder unit entrance sensor detects the length of the paper fed from the
main machine.
• Off line mode. The leading edge sensor of the Manual Feeder detects the length of the
paper fed directly into the manual feeder.
2 Disp FPpr L
This SP displays the length of the paper most recently folded in the Folder unit.
[0 to 32767 mm]
One of two sensors detects the leading edge and trailing edge of the paper, and calculates
the paper length based on the length of time for the paper to pass below:
• On line mode. The Folder unit entrance sensor detects the length of the paper fed from the
main machine.
• Off line mode. The leading edge sensor of the Manual Feeder detects the length of the
paper fed directly into the manual feeder.
11 Fold Roller Speed
The SP sets the default speed of the fan fold roller motor when the man machine is turned on.
342
Punch Drive Clutch
Adjust Number of Folder Transport Motor Rotations
(Fan) Fold Motor Adjustment
Display Paper Length
Display Folded Length
(Fan) Fold Roller Speed