Ricoh Neptune-P1 Service Manual page 346

Note: An adjustment in the "+" direction lengthens the distance, and an adjustment in the "-"
direction shortens the distance.
22 FPl Tmg:LE
This SP adjusts the distance that the paper travels past the fan fold sensor pair before the fold
plate starts to descend.
[-70 to 70/0/0.1 mm]
Note: An adjustment in the "+" direction lengthens the distance, and an adjustment in the "-"
direction shortens the distance.
31 FPlMvt:LE:CF
This SP adjusts the distance that the fan fold plate descends in order to guide the paper into the
fan folding unit for the first fold when corner folding and fan folding have been selected for the
job.
[-200 to +200/0/1 mm]
Note:
• This SP applies only if corner folding the first sheet has been selected for the job.
• An adjustment of 1 step is equivalent to 0.191 mm.
• An adjustment in the "+" direction moves the fan fold plates closer to the fan fold rollers,
and an adjustment in the "-" direction moves the plate away from the fan fold rollers.
32 FPlStp:LE:CF
This SP adjusts the length of time the paper feeds before the fan fold plate starts to ascend when
corner folding and fan folding have been selected for the job.
[-100 too +500/0/10 mm]
Note:
• This SP applies only if corner folding has also been selected for the job.
• An adjustment in the "+" direction lengthens the time, and an adjustment in the "-" direction
shortens the time.
33 FPlTmg:LE:CF
This SP adjusts the distance the paper feeds past the fan folder entrance sensor (the sensor goes
ON) before the fold plate starts to descend when corner folding is also selected for the job.
[-70 to 70/0/0.1 mm]
Note:
• This adjustment applies only after corner folding is also selected for the job.
Fold Plate Timing: Folding
Fold Plate Movement: Leading Edge Corner Folding
Fold Plate Halt: Leading Edge Corner Folding
Fold Plate Timing: Leading Edge Corner Folding
SP6-xxx Peripherals
5
345