Ricoh Neptune-P1 Service Manual page 307

5. Service Tables
0: Yes. SSL not used.
1: No. SSL used.
RCG Connect T/O
Sets the length of time (seconds) for the time-out when the RCG (Remote Communication
8
Gate) connects during a call via the @Remote network.
[1 to 90/1 sec.]
RCG Write Timeout
Sets the length of time (seconds) for the time-out when sent data is written to the RCG during
9
a call over the @Remote network.
[0 to 100/1 sec.]
RCG Read Timeout
5
Sets the length of time (seconds) for the timeout when sent data is written from the RCG during
10
a call over the @Remote network.
[0 to 100/1 sec.]
Port 80
Controls if permission is given to get access to the SOAP method over Port 80 on the @Remote
network.
11
[0 to 1/1]
0: No. Access denied
1: Yes. Access granted.
@Remote Service DFU
NVRAM Offset: NrsCommEnable
12
[0 to 1/1/1]
0: Disable
1: Enable
Function Flag
This SP displays the Embedded RC Gate installation end flag.
21
1: Installation completed
2: Installation not completed
22 Install Status
306
RCG Connect Timeout
Port 80 Enable