Ricoh Neptune-P1 Service Manual page 184

10. [Execute] to print the pattern. After printing, you will see "Completed".
• The pattern selection is reset to zero (default) as soon as the pattern has printed. The pattern must
be selected for each printing.
Step 1: Erase Margins
Set these SPs to "5" to make measurement easier:
SP Set To:
2101-1 5
2101-2 5
2101-3 5
2101-4 5
Step 2: Printer: Leading Edge, Side-to-Side Registration
1. Print Test Pattern 2 for each paper feed station.
• Bypass
• Roll Feeder Roll 1
• Roll Feeder Roll 2
• Paper Cassette
2. Measure the gaps for the leading edge and side-to-side registration.
Print Erase Margin – Leading Edge
Print Erase Margin – Trailing Edge
Print Erase Margin – Left Edge
Print Erase Margin – Right Edge
Comments
SP Adjustments
3
183