Ricoh Neptune-P1 Service Manual page 50

14. While you lift the main machine by its handle [3], set screw
and tighten it.
15. Tighten screws and
16. Do the above procedure again for the left joint bracket [4].
• The guide plate and screws are provided as accessories with the roll feeder.
17. Install the guide plate [2] ( x 2 Blue). Hang the hooks on each end to position the plate for correct
installation..
• The movable guide plates are provided as accessories with the roll feeder.
18. Attach the movable guide plates [1] (x6).
.
Roll Feeder (B852)
in the lower hole of the keyhole cutout
1
49