Ricoh Neptune-P1 Service Manual page 351

5. Service Tables
23 MFL:F3
This SP adjusts the length of the 2nd section in order to complete the 3rd (last) section.
[-20 to +20/-3/01. mm]
Note: Adjustment in the "-" or "+" direction decreases or increases the length.
31 MFL:Std Size
This SP fine adjusts the length of the sections between folds for copies printed on standard size
paper.
[-20 to +20/0/0.1]
Note: Adjustment in the "-" or "+" direction decreases or increases the length.
32 MFL:Long
5
This SP adjusts the length of the last section (from last fold to the trailing edge) during long fan
folding.
[-20 to +20/0/0.1 mm]
Note: Adjustment in the "-" or "+" direction decreases or increases the length.
41 Long:S2Peak
This SP modifies the operation of the fan fold sensor (F) to determine the lengths of the odd and
even sections for long fan folding only.
• If the first fold is a peak fold, this SP setting determines the length of even number sections,
excluding the 1st section.
• If the first fold is a valley fold, this SP setting determines the length of odd sections.
Note: Adjustment in the "-" or "+" direction decreases or increases the length.
42 MFL:S3
This SP modifies the operation of the fan fold sensor (R) to determine the lengths of the odd and
even sections for long fan folding.
• If the first fold is a peak fold, this SP setting determines the length of odd number sections,
excluding the 1st section.
• If the first fold is a valley fold, this SP setting determines the length of even sections.
Note: Adjustment in the "-" or "+" direction decreases or increases the length.
43 MFL:S4
This SP modifies the operation of the fan fold sensor (F) to determine the lengths of the odd and
even sections for long fan folding (including file flap or margin folding).
350
Margin Fold Length: 3rd Fold
Margin Fold Length: Regular Size
Margin Fold Length: Long Print
Long Print: 1st Fold Peak: After 2nd Fold
Long Print: 1st Fold Valley: After 3rd Fold
Margin Fold: 1st Fold Peak: After 4th Fold