Table of Contents
Advertisement
22 Instant Trans Off
Switches instant transmission off/on.
[0 to 1/1/1]
0: Off. Instant transmission not possible with network setting errors.
1: On. Instant transmission possible with network setting errors.
Note:
• The machine will continue to transmit over the network, even if the network settings are
incorrect. (This causes multiple errors, of course.)
• With this SP off, the machine will stop communicating with the network if the settings are
wrong. This reduces the amount of spurious network traffic caused by errors due to
incorrect settings.
5846
UCS Setting
LDAP Search TOut
10
Sets the length of the time-out for the search of the LDAP server.
[1 to 255/1]
AddrB Acl Info
This SP must be executed immediately after installation of an HDD unit in a basic machine that
previously had no HDD. The first time the machine is powered on with the new HDD installed,
the system automatically takes the address book from the NVRAM and writes it to the new
HDD. However, the new address book on the HDD can be accessed only by the system
administrator at this stage. Executing this SP by the service technician immediately after power
on grants full address book access to all users.
Procedure
41
1. Turn the machine off.
2. Install the new HDD.
3. Turn the machine on.
4. The address book and its initial data are created on the HDD automatically. However,
at this point the address book can be accessed by only the system administrator or key
operator.
5. Enter the SP mode and do SP5846-41. After this SP executes successfully, any user can
access the address book.
AddB Media
43
Displays the location of the address book currently in use.
LDAP Search Timeout
Fill Addr Acl Info.
SP5-xxx Mode
5
321
Advertisement
Table of Contents
Troubleshooting
