Ricoh Neptune-P1 Service Manual page 334

This SP checks the mechanical counter to confirm whether it is connected.
0: Disconnected 1: Detect 2: Unknown
Note:
• The reading returned by this SP does not change if the mechanical counter is removed
while the machine is powered on.
• About 3 sec. is required for this SP to return a correct reading after the machine is
switched on.
5990 SP Print Mode (SMC Printout)
1 All
2 SP (SP codes only)
4 Logging Data
5 Diagnostic Report
6 Non-Default
7 NIB Summary
Prints all of the system parameter lists for the item selected.
Input the number for the item that you want to print, and then
press [1]: "Execute" on the touch panel.
SP5-xxx Mode
5
333