Gvrp And Bridge Extension Commands; Bridge-Ext Gvrp - SMC Networks SMC6724L3 Management Manual

GVRP and Bridge Extension Commands

GARP VLAN Registration Protocol defines a way for switches to
exchange VLAN information in order to automatically register VLAN
members on interfaces across the network. This section describes how to
enable GVRP for individual interfaces and globally for the switch, as well
as how to display default configuration settings for the Bridge Extension
MIB.
Command

bridge-ext gvrp

show bridge-ext
switchport gvrp
switchport forbidden
vlan
show gvrp configuration Displays GVRP configuration for the
garp timer
show garp timer
bridge-ext gvrp
Use this command to enable GVRP globally for the switch. Use the no
form to disable it.
Syntax
bridge-ext gvrp
no bridge-ext gvrp
Default Setting
Disabled
GVRP B
AND
Function
Enables GVRP globally for the switch
Shows the global bridge extension
configuration
Enables GVRP for an interface
Configures forbidden VLANs for an
interface
selected interface
Sets the GARP timer for the selected
function
Shows the GARP timer for the selected
function
E
RIDGE XTENSION
C
OMMANDS
Mode Page
GC 4-175
PE 4-176
IC 4-177
IC 4-171
NE, 4-178
PE
IC 4-178
NE, 4-180
PE
4-175