Configuring Private Vlans; Pvlan - SMC Networks SMC6724L3 Management Manual

Example
The following example shows how to display information for VLAN 1:
Console#show vlan id 1
VLAN Type
---- ------- ---------------- --------- ----------------------------------
1 Static
Console#

Configuring Private VLANs

Private VLANs provide port-based security and isolation between ports
within the assigned VLAN. This section describes commands used to
configure private VlANs.
Command

pvlan

show pvlan
pvlan
Use this command to enable or configure a private VLAN. Use the no
form to disable the private VLAN.
Syntax
pvlan [up-link interface-list down-link interface-list]
no pvlan
• up-link – Specifies an uplink interface.
• down-link – Specifies a downlink interface.
Default Setting
No private VLANs are defined.
Command Mode
Global Configuration
Name Status
DefaultVlan
Function
Enables and configured private VLANS
Displays the configured private VLANS
Ports/Channel groups
Active Eth1/ 1 Eth1/ 2 Eth1/ 3 Eth1/ 4 Eth1/ 5
Eth1/ 6 Eth1/ 7 Eth1/ 8 Eth1/ 9 Eth1/10
Eth1/11 Eth1/12 Eth1/13 Eth1/14 Eth1/15
Eth1/16 Eth1/17 Eth1/18 Eth1/19 Eth1/20
Eth1/21 Eth1/22 Eth1/23 Eth1/24 Eth1/25
Eth1/26
VLAN C
OMMANDS
Mode Page
GC
PE
4-173
4-173
4-174