Dir - SMC Networks SMC6724L3 Management Manual

dir

Use this command to display a list of files in flash memory.
Syntax
dir [boot-rom | config | opcode [:filename]]
The type of file or image to display includes:
• boot-rom - Boot ROM (or diagnostic) image file.
• config - Switch configuration file.
• opcode - Run-time operation code image file.
• filename - Name of the file or image. If this file exists but contains
errors, information on this file cannot be shown.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• If you enter the command dir without any parameters, the system
displays all files.
• File information is shown below:
Column Heading
file name
file type
startup
size
Description
The name of the file.
File types: Boot-Rom, Operation Code, and Config
file.
Shows if this file is used when the system is started.
The length of the file in bytes.
F /F C
LASH ILE OMMANDS
4-57