Displaying Statistics For Ip Protocols; Ip Statistics - SMC Networks SMC6724L3 Management Manual

CLI - This example provides detailed statistics on common IP-related
protocols.
Console#show ip traffic

IP statistics:

Rcvd:
Frags: 0 reassembled, 0 timeouts
Sent:
ICMP statistics:
Rcvd: 0 checksum errors, 0 redirects, 0 unreachable, 0 echo
Sent: 0 redirects, 0 unreachable, 0 echo, 0 echo reply
UDP statistics:
Rcvd: 0 total, 0 checksum errors, 0 no port
Sent: 0 total
TCP statistics:
Rcvd: 0 total, 0 checksum errors
Sent: 0 total
ARP statistics:
Rcvd: 0 requests, 1 replies
Sent: 1 requests, 0 replies

Displaying Statistics for IP Protocols

IP Statistics
The Internet Protocol (IP) provides a mechanism for transmitting blocks
of data (often called packets or frames) from a source to a destination,
where these network devices (i.e., hosts) are identified by fixed length
addresses. The Internet Protocol also provides for fragmentation and
reassembly of long packets, if necessary, for transmission through "small
packet" networks.
5 total, 5 local destination
0 checksum errors
0 unknown protocol, 0 not a gateway
0 fragmented, 0 couldn't fragment
9 generated
0 no route
5 echo reply, 0 mask requests, 0 mask replies, 0 quench
0 parameter, 0 timestamp
0 mask requests, 0 mask replies, 0 quench, 0 timestamp
0 time exceeded, 0 parameter problem
IP R
OUTING
4-229
3-165