Domain-Name - SMC Networks SMC6724L3 Management Manual

Tigerswitch 10/100 24-port layer 3 switch
Hide thumbs Also See for SMC6724L3:
Table of Contents

Advertisement

Command Mode
DHCP Pool Configuration
Usage Guidelines
The IP address of the router should be on the same subnet as the
client. You can specify up to two routers. Routers are listed in order of
preference (starting with address1 as the most preferred router).
Example
Console(config-dhcp)#default-router 10.1.0.54 10.1.0.64
Console(config-dhcp)#

domain-name

Use this command to specify the domain name for a DHCP client. Use the
no form to remove the domain name.
Syntax
domain-name domain
no domain-name
domain - Specifies the domain name of the client.
(Range: 1-32 characters)
Default Setting
None
Command Mode
DHCP Pool Configuration
Example
Console(config-dhcp)#domain-name sample.com
Console(config-dhcp)#
DHCP C
OMMANDS
4-107

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SMC6724L3 and is the answer not in the manual?

Table of Contents