Show Ip Igmp Groups - SMC Networks SMC6724L3 Management Manual

Example
The following example clears all multicast group entries for VLAN 1:
Console#clear ip igmp group interface vlan 1
Console#

show ip igmp groups

Use this command to display information on multicast groups active on
this switch.
Syntax
show ip igmp groups [group-address | interface vlan vlan-id]
• group-address - IP address of the multicast group.
• vlan-id - VLAN ID (Range: 1-4094)
Default Setting
Displays information for all known groups.
Command Mode
Normal Exec, Privileged Exec
Command Usage
• This command displays information for multicast groups learned via
IGMP, not static groups.
• If the switch receives an IGMP Version 1 Membership Report, it sets
a timer to note that there are Version 1 hosts present which are
members of the group for which it heard the report.
• If there are Version 1 hosts present for a particular group, the switch
will ignore any Leave Group messages that it receives for that group.
M F
ULTICAST ILTERING
C
OMMANDS
4-213