Enable - SMC Networks SMC6724L3 Management Manual

enable

Use this command to activate Privileged Exec mode. In privileged mode,
additional commands are available, and certain commands display
additional information. See "Understanding Command Modes" on
page 4-6.
Syntax
enable [level]
level - Privilege level to log into the device.
The device has two predefined privilege levels: 0: Normal Exec,
15: Privileged Exec. Enter level 15 to access Privileged Exec mode.
Default Setting
Level 15
Command Mode
Normal Exec
Command Usage
• "super" is the default password required to change the command
mode from Normal Exec to Privileged Exec. (To set this password, see
the enable password command on page 4-34.)
• The "#" character is appended to the end of the prompt to indicate
that the system is in privileged access mode.
Example
Console>enable
Password: [privileged level password]
Console#
Related Commands
disable (4-26)
enable password (4-34)
G C
ENERAL OMMANDS
4-25