Gvrp And Bridge Extension Commands; Bridge-Ext Gvrp - SMC Networks 8708L2 - annexe 1 Management Manual

GVRP and Bridge Extension Commands

GARP VLAN Registration Protocol defines a way for switches to
exchange VLAN information in order to automatically register VLAN
members on interfaces across the network. This section describes how to
enable GVRP for individual interfaces and globally for the switch, as well
as how to display default configuration settings for the Bridge Extension
MIB.
Command

bridge-ext gvrp

show bridge-ext
switchport gvrp
switchport forbidden
vlan
show gvrp
configuration
garp timer
show garp timer
bridge-ext gvrp
This command enables GVRP globally for the switch. Use the no form to
disable it.
Syntax
[no] bridge-ext gvrp
Default Setting
Disabled
Command Mode
Global Configuration
GVRP
Table 4-61 GVRP and Bridge Extension Commands
Function
Enables GVRP globally for the switch GC
Shows the global bridge extension
configuration
Enables GVRP for an interface
Configures forbidden VLANs for an
interface
Displays GVRP configuration for the
selected interface
Sets the GARP timer for the selected
function
Shows the GARP timer for the selected
function
B E
AND RIDGE XTENSION
C
OMMANDS
Mode Page
4-247
PE 4-248
IC 4-249
IC 4-238
NE, PE 4-249
IC 4-250
NE, PE 4-251
4-247