Service Dhcp - SMC Networks SMC6724L3 Management Manual

Command
clear ip dhcp
binding
show ip dhcp
binding
* These commands are used for manually binding an address to a client.

service dhcp

Use this command to enable the DHCP server on this switch. Use the no
form to disable the DHCP server.
Syntax
service dhcp
no service dhcp
Default Setting
Enabled
Command Mode
Global Configuration
Example
Console(config)#service dhcp
Console(config)#
Function
Deletes an automatic address binding from the
DHCP server database
Displays address bindings on the DHCP
server
DHCP C
OMMANDS
Mode Page
PE 4-116
PE, NE 4-117
4-103