Flash/File Commands; Copy - SMC Networks SMC6724L3 Management Manual

Example
Console#show version
Unit1
Serial number
Service tag
Hardware version
Number of ports
Main power status
Redundant power status :not present
Agent(master)
Unit id
Loader version
Boot rom version
Operation code version :1.0.1.3
Console#

Flash/File Commands

These commands are used to manage the system code or configuration
files.
Command

copy

delete
dir
whichboot
boot system
copy
Use this command to move (upload/download) a code image or
configuration file between the switch's flash memory and a TFTP server.
When you save the system code or configuration settings to a file on a
TFTP server, that file can later be downloaded to the switch to restore
system operation. The success of the file transfer depends on the
accessibility of the TFTP server and the quality of the network connection.
:1111111111
:
:R0A
:26
:up
:1
:1.0.0.0
:1.0.0.0
Function
Copies a code image or a switch configuration to
or from flash memory or a TFTP server
Deletes a file or code image
Displays a list of files in flash memory
Displays the files booted
Specifies the file or image used to start up the
system
F /F C
LASH ILE OMMANDS
Mode
PE
PE
PE
PE
GC
Page
4-53
4-56
4-57
4-58
4-59
4-53