Routing Information Protocol (Rip); Router Rip - SMC Networks SMC6724L3 Management Manual

Routing Information Protocol (RIP)

Command

router rip

timers basic
network
neighbor
version
ip rip receive
version
ip rip send version Sets the RIP send version to use on a network
ip split-horizon
ip rip
authentication key
ip rip
authentication
mode
show rip globals
show ip rip
router rip
Use this command to enable Routing Information Protocol (RIP) routing
for all IP interfaces on the router. Use the no form to disable it.
Syntax
router rip
no router rip
Function
Enables the RIP routing protocol
Sets basic timers, including update, timeout,
garbage collection
Specifies the network interfaces that are to use
RIP routing
Defines a neighboring router with which to
exchange information
Specifies the RIP version to use on all network
interfaces (if not already specified with a receive
version or send version command)
Sets the RIP receive version to use on a
network interface
interface
Enables split-horizon or poison-reverse loop
prevention
Enables authentication for RIP2 packets and
specifies keys
Specifies the type of authentication used for
RIP2 packets
Displays global configuration settings and
statistics for RIP
Displays RIP configuration information for
each network interface
IP R C
OUTING OMMANDS
Mode Page
GC
RC
RC
RC
RC
IC
IC
IC
IC
IC
PE
PE
4-231
4-232
4-233
4-234
4-235
4-236
4-237
4-239
4-240
4-241
4-242
4-242
4-231