Show Ip Access-Group - SMC Networks SMC6724L3 Management Manual

C L
OMMAND INE
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Example
Console(config)#int eth 1/25
Console(config-if)#ip access-group standard david in
Console(config-if)#
Related Commands
show ip access-list (4-83)

show ip access-group

Use this command to show the ports assigned to IP ACLs.
Command Mode
Privileged Exec
Example
Console#show ip access-group
Interface ethernet 1/25
IP standard access-list david
Console#
Related Commands
ip access-group (4-81)
4-82
I
NTERFACE