Clear Ip Route; Show Ip Route - SMC Networks SMC6724L3 Management Manual

C L
OMMAND INE

clear ip route

Use this command to remove dynamically learned entries from the IP
routing table.
Syntax
clear ip route {network [netmask] | *}
• network – Network or subnet address.
• netmask - Network mask for the associated IP subnet. This mask
identifies the host address bits used for routing to specific subnets.
• * – Removes all dynamic routing table entries.
Command Mode
Privileged Exec
Command Usage
• This command only clears dynamically learned routes.
• Use the no ip address command to remove a local interface.
• Use the no ip route command to remove a static route.
Example
Console#clear ip route 10.1.5.0
Console#

show ip route

Use this command to display information in the IP routing table.
Syntax
show ip route [config | address [netmask]]
• config – Displays all static routing entries.
• address – IP address of the destination network, subnetwork or host
for which routing information is to be displayed.
• netmask - Network mask for the associated IP subnet. This mask
identifies the host address bits used for routing to specific subnets.
Command Mode
Privileged Exec
4-228
I
NTERFACE