SMC Networks SMC6724L3 Management Manual page 102

Tigerswitch 10/100 24-port layer 3 switch
Hide thumbs Also See for SMC6724L3:
Table of Contents

Advertisement

C
ONFIGURING THE
Command Usage
You must specify the IP address for at least one DHCP server. Otherwise,
the switch's DHCP relay agent will not forward client requests to a DHCP
server.
Command Attributes
• VLAN ID – ID of configured VLAN.
• VLAN Name – Name of the VLAN.
• Server IP Address – Addresses of DHCP servers to be used by the
switch's DHCP relay agent in order of preference.
Web – Click DHCP, Relay Configuration. Enter up to five IP addresses for
any VLAN, then click Restart DHCP Relay to start the relay service.
CLI – This example specifies one DHCP relay server for VLAN 1, and
enables the relay service.
Console(config)#interface vlan 1
Console(config-if)#dhcp relay server 10.1.0.99
Console(config-if)#ip dhcp relay
Console(config-if)#
3-54
S
WITCH
4-119
4-101
4-99

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SMC6724L3 and is the answer not in the manual?

Table of Contents