SMC Networks SMC6724L3 Management Manual page 106

C
ONFIGURING THE
Command Attributes
Creating a New Address Pool
• Pool Name – A string or integer. (Range: 1-8 characters)
Setting the Network Parameters
• IP – The IP address of the DHCP address pool.
• Subnet Mask – The bit combination that identifies the network (or
subnet) and the host portion of the DHCP address pool.
Setting the Host Parameters
• IP – The IP address of the DHCP address pool.
• Subnet Mask – Specifies the network mask of the client.
• Hardware Address – Specifies the MAC address and protocol used on
the client. (Options: Ethernet, IEEE802, FDDI; Default: Ethernet)
• Client-Identifier – A unique designation for the client device, either a
text string (1-15 characters) or hexadecimal value.
Setting the Optional Parameters
• Default Router – The IP address of the primary and alternate gateway
router. The IP address of the router should be on the same subnet as the
client.
• DNS Server – The IP address of the primary and alternate DNS server.
DNS servers must be configured for a DHCP client to map host names
to IP addresses.
• Netbios Server – IP address of the primary and alternate NetBIOS
Windows Internet Naming Service (WINS) name server used for
Microsoft DHCP clients.
• Netbios Type – NetBIOS node type for Microsoft DHCP clients.
(Options: Broadcast, Hybrid, Mixed, Peer to Peer; Default: Hybrid)
• Domain Name – The domain name of the client.
(Range: 1-32 characters)
3-58
S
WITCH