Gvrp And Bridge Extension Commands; Bridge-Ext Gvrp - SMC Networks SMC8748ML3 Management Manual

C L
OMMAND INE

GVRP and Bridge Extension Commands

GARP VLAN Registration Protocol defines a way for switches to exchange
VLAN information in order to automatically register VLAN members on
interfaces across the network. This section describes how to enable GVRP
for individual interfaces and globally for the switch, as well as how to display
default configuration settings for the Bridge Extension MIB.
Command

bridge-ext gvrp

show bridge-ext
switchport gvrp
switchport forbidden vlan Configures forbidden VLANs for an
show gvrp configuration
garp timer
show garp timer
bridge-ext gvrp
This command enables GVRP globally for the switch. Use the no form to
disable it.
Syntax
[no] bridge-ext gvrp
Default Setting
Disabled
Command Mode
Global Configuration
4-264
I
NTERFACE
Table 4-65 GVRP and Bridge Extension Commands
Function
Enables GVRP globally for the switch
Shows the global bridge extension
configuration
Enables GVRP for an interface
interface
Displays GVRP configuration for the
selected interface
Sets the GARP timer for the selected
function
Shows the GARP timer for the selected
function
Mode Page
GC 4-264
PE 4-265
IC 4-266
IC 4-255
NE, 4-266
PE
IC 4-267
NE, 4-268
PE