Enabling Or Disabling Gvrp (Global Setting); Displaying Basic Vlan Information - SMC Networks SMC6724L3 Management Manual

Tigerswitch 10/100 24-port layer 3 switch

Hide thumbs Also See for SMC6724L3:

Table of Contents

Enabling or Disabling GVRP (Global Setting)

GARP VLAN Registration Protocol (GVRP) defines a way for switches to

exchange VLAN information in order to register VLAN members on

ports across the network. VLANs are dynamically configured based on

join messages issued by host devices and propagated throughout the

network. GVRP must be enabled to permit automatic VLAN registration,

and to support VLANs which extend beyond the local switch.

(Default: Disabled)

Web – Click System, Bridge Extension. Enable or disable GVRP, click

CLI – This example enables GVRP for the switch.

Console(config)#bridge-ext gvrp

Console(config)#

The VLAN Basic Information page displays basic information on the

VLAN type supported by the switch.

Field Attributes

• VLAN Version Number* – The VLAN version used by this switch as

specified in the IEEE 802.1Q standard.

• Maximum VLAN ID – Maximum VLAN ID recognized by this switch.

ONFIGURATION

Do you have a question about the SMC6724L3 and is the answer not in the manual?