Ip Dhcp Relay Server - SMC Networks SMC6724L3 Management Manual

ip dhcp relay server

Use this command to specify the addresses of DHCP servers to be used by
the switch's DHCP relay agent. Use the no form to clear all addresses.
Syntax
ip dhcp relay server address1 [address2 [address3 ...]]
no ip dhcp relay server
address - IP address of DHCP server. (Range: 1-3 addresses)
Default Setting
None
Command Mode
Interface Configuration (VLAN)
Usage Guidelines
• You must specify the IP address for at least one DHCP server.
Otherwise, the switch's DHCP relay agent will not forward client
requests to a DHCP server.
• To start DHCP relay service, enter the ip dhcp restart relay
command.
Example
Console(config)#interface vlan 1
Console(config-if)#ip dhcp relay server 10.1.0.99
Console(config-if)#
Related Commands
ip dhcp restart relay (4-99)
DHCP C
OMMANDS
4-101