Configuration Commands - SMC Networks SMC6724L3 Management Manual

C L
OMMAND INE
Username: guest
Password: [guest login password]
CLI session with the SMC6724L3 1 Switch is opened.
To end the CLI session, enter [Exit].
Console#enable
Password: [privileged level password]
Console#

Configuration Commands

Configuration commands are privileged level commands used to modify
switch settings. These commands modify the running configuration only
and are not saved when the switch is rebooted. To store the running
configuration in non-volatile storage, use the copy running-config
startup-config command.
The configuration commands are organized into different modes:
• Global Configuration - These commands modify the system level
configuration, and include commands such as hostname and
snmp-server community.
• Access Control List Configuration - These commands are used for
packet filtering.
• DHCP Configuration - These commands are used to configure the
DHCP server.
• Interface Configuration - These commands modify the port
configuration such as speed-duplex and negotiation.
• Line Configuration - These commands modify the console port and
Telnet configuration, and include command such as parity and databits.
• Router Configuration - These commands configure global settings for
unicast and multicast routing protocols.
• VLAN Configuration - Includes the command to create VLAN groups.
4-8
I
NTERFACE