SMC Networks SMC6724L3 Management Manual page 142

C
ONFIGURING THE
Advanced Configuration Settings for RSTP
• Path Cost Method – The path cost is used to determine the best path
between devices. The path cost method is used to determine the range of
values that can be assigned to each interface.
Long: Specifies 32-bit based values that range from 1-200,000,000.
Short: Specifies 16-bit based values that range from 1-65535. (This is
the default.)
• Transmission Limit – The maximum transmission rate for BPDUs is
specified by setting the minimum interval between the transmission of
consecutive protocol messages. (Range: 1-10; Default: 3)
Web – Click Spanning Tree, STA Configuration. Modify the required
attributes, and click Apply.
3-94
S
WITCH