Client-Identifier - SMC Networks SMC6724L3 Management Manual

C L
OMMAND INE
is used (see page 3-178). This command is valid for manual bindings
only.
• The no host command only clears the address from the DHCP server
database. It does not cancel the IP address currently in use by the host.
Example
Console(config-dhcp)#host 10.1.0.21 255.255.255.0
Console(config-dhcp)#
Related Commands

client-identifier (4-114)

hardware-address (4-115)
client-identifier
Use this command to specify the client identifier of a DHCP client. Use
the no form to remove the client identifier.
Syntax
client-identifier {text text | hex hex}
no client-identifier
• text - A text string. (Range: 1-15 characters)
• hex - The hexadecimal value.
Default Setting
None
Command Mode
DHCP Pool Configuration
Command Usage
• This command identifies a DHCP client to bind to an address specified
in the host command. If both a client identifier and hardware address
are configured for a host address, the client identifier takes precedence
over the hardware address in the search procedure.
4-114
I
NTERFACE