Timers Spf - SMC Networks SMC6724L3 Management Manual

C L
OMMAND INE

timers spf

Use this command to configure the hold time between making two
consecutive shortest path first (SPF) calculations. Use the no form to
restore the default value.
Syntax
timers spf spf-holdtime
no timers spf
spf-holdtime - Minimum time between two consecutive SPF
calculations. (Range: 0-65535 seconds)
Command Mode
Router Configuration
Default Setting
10 seconds
Command Usage
• Setting the SPF holdtime to 0 means that there is no delay between
consecutive calculations.
• Using a low value allows the router to switch to a new path faster, but
uses more CPU processing time.
Example
Console(config-router)#timers spf 20
Console(config-router)#
4-250
I
NTERFACE