Address Table Commands; Mac-Address-Table Static - SMC Networks SMC6724L3 Management Manual

Address Table Commands

These commands are used to configure the address table for filtering
specified addresses, displaying current entries, clearing the table, or setting
the aging time.
Command
mac-address-table
static
clear
mac-address-table
dynamic
show
mac-address-table
mac-address-table
aging-time
show
mac-address-table
aging-time

mac-address-table static

Use this command to map a static address to a destination port in a
VLAN. Use the no form to remove an address.
Syntax
mac-address-table static mac-address interface interface
vlan vlan-id [action]
no mac-address-table static mac-address vlan vlan-id
• mac-address - MAC address.
• interface
• ethernet unit/port
• port-channel channel-id (Range: 1-4)
• vlan-id - VLAN ID (Range: 1-4094)
Function
Maps a static address to a port in a VLAN
Removes any learned entries from the
forwarding database
Displays entries in the bridge-forwarding
database
Sets the aging time of the address table
Shows the aging time for the address table
- unit - This is device 1.
- port - Port number.
A T
DDRESS ABLE
C
OMMANDS
Mode Page
GC 4-141
PE 4-142
PE 4-143
GC 4-144
PE 4-145
4-141