Ip Dhcp Restart Client - SMC Networks SMC6724L3 Management Manual

C L
OMMAND INE
Default Setting
None
Command Mode
Interface Configuration (VLAN)
Command Usage
This command is used to include a client identifier in all
communications with the DHCP server. The identifier type depends on
the requirements of your DHCP server.
Example
Console(config)#interface vlan 2
Console(config-if)#ip dhcp client-identifier hex 00-00-e8-66-65-72
Console(config-if)#
Related Commands

ip dhcp restart client (4-98)

ip dhcp restart client
Use this command to submit a BOOTP or DHCP client request.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• This command issues a BOOTP or DHCP client request for any IP
interface that has been set to BOOTP or DHCP mode via the ip
address command.
• DHCP requires the server to reassign the client's last address if
available.
4-98
I
NTERFACE