Show Ip Traffic - SMC Networks SMC6724L3 Management Manual

Command Usage
If the address is specified without the netmask parameter, the router
displays all routes for the corresponding natural class address
(page 4-233).
Example
Console#show ip route
Ip Address
--------------- --------------- --------------- ---------- ------ ---------
0.0.0.0
10.2.48.2
10.2.5.6
10.3.9.1
Total entry: 4
Console#
Field
Ip
Address
Netmask
Next Hop IP address of the next hop (or gateway) used for this route.
Protocol
Metric
Interface

show ip traffic

Use this command to display statistics for IP, ICMP, UDP, TCP and ARP
protocols.
Command Mode
Privileged Exec
Command Usage
For a description of the information shown by this command, see
"Displaying Statistics for IP Protocols" on page 3-165.
Netmask
0.0.0.0
255.255.252.0
255.255.255.0
255.255.255.0
Description
IP address of the destination network, subnetwork, or host. Note that
the address 0.0.0.0 indicates the default gateway for this router.
Network mask for the associated IP subnet.
The protocol which generated this route information. (Values: static,
local, RIP, OSPF)
Cost for this interface.
VLAN interface through which this address can be reached.
IP R
Next Hop Protocol
10.2.48.102
10.2.48.16
10.2.8.12
10.2.9.254 OSPF-intra
C
OUTING OMMANDS
Metric Interface
static 0
local 0
RIP 1
2
4-229
1
1
2
3