Igmp Query Commands (Layer 2); Ip Igmp Snooping Querier - SMC Networks SMC6724L3 Management Manual

IGMP Query Commands (Layer 2)

Command
ip igmp snooping
querier
ip igmp snooping
query-count
ip igmp snooping
query-interval
ip igmp snooping
query-max-response-
time
ip igmp snooping
router-port-expire-
time

ip igmp snooping querier

Use this command to enable the switch as an IGMP querier. Use the no
form to disable it.
Syntax
ip igmp snooping querier
no ip igmp snooping querier
Default Setting
Enabled
Command Mode
Global Configuration
Command Usage
If enabled, the switch will serve as querier if elected. The querier is
responsible for asking hosts if they want to receive multicast traffic.
Example
Console(config)#ip igmp snooping querier
Console(config)#
M
Function
Allows this device to act as the querier for
IGMP snooping
Configures the query count
Configures the query interval
Configures the report delay
Configures the query timeout
F
ULTICAST ILTERING
C
OMMANDS
Mode Page
GC 4-201
GC 4-202
GC 4-203
GC 4-203
GC 4-204
4-201