Show Dot1X - SMC Networks SMC6724L3 Management Manual

C L
OMMAND INE

show dot1x

Use this command to show general port authentication related settings on
the switch or a specific interface.
Syntax
show dot1x [statistics] [interface interface]
interface
• ethernet unit/port
Command Mode
Privileged Exec
Command Usage
This command displays the following information:
• Global 802.1X Parameters – Displays the global port access control
parameters that can be configured for this switch as described in the
preceding pages, including reauth-enabled (page 4-69), reauth-period
(page 4-70), quiet-period (page 4-70), tx-period (page 4-71), and
max-req (page 4-68). It also displays the following global parameters
which are set to a fixed value, including the following items:
- supp-timeout– Supplicant timeout.
- server-timeout– Server timeout.
- reauth-max– Maximum number of reauthentication attempts.
• 802.1X Port Summary – Displays the port access control parameters for
each interface, including the following items:
- Status– Administrative state for port access control.
- Mode– Dot1x port control mode (page 4-68).
- Authorized– Authorization status (yes or n/a - not authorized).
• 802.1X Port Details – Displays detailed port access control settings for
each interface as described in the preceding pages, including
administrative status for port access control, Max request (page 4-68),
Quiet period (page 4-70), Reauth period (page 4-70), Tx period
4-72
I
NTERFACE
- unit - This is device 1.
- port - Port number.