Igmp Commands (Layer 3) - SMC Networks SMC6724L3 Management Manual

Command Mode
Global Configuration
Command Usage
The switch must use IGMPv2 for this command to take effect.
Example
The following shows how to configure the default timeout to 300 seconds:
Console(config)#ip igmp snooping router-port-expire-time 300
Console(config)#
Related Commands
ip igmp snooping version (4-198)

IGMP Commands (Layer 3)

Command
ip igmp
ip igmp robustval
ip igmp
query-interval
ip igmp
max-resp-interval
ip igmp
last-memb-query-
interval
ip igmp version
show ip igmp
interface
clear ip igmp group
show ip igmp groups Displays detailed information for IGMP
M
Function
Enables IGMP for the specified interface
Configures the expected packet loss
Configures frequency for sending host
query messages
Configures the maximum host response
time
Configures frequency for sending
group-specific host query messages
Configures IGMP version used on this
interface
Displays the IGMP configuration for
specified interfaces
Deletes entries from the IGMP cache
groups
F
ULTICAST ILTERING
C
OMMANDS
Mode Page
IC 4-206
IC 4-207
IC 4-207
IC 4-208
IC 4-209
IC 4-210
NE, 4-211
PE
PE 4-212
NE, 4-213
PE
4-205