SMC Networks SMC6724L3 Management Manual page 295

To enter the Global Configuration mode, enter the command configure
in Privileged Exec mode. The system prompt will change to
"Console(config)#" which gives you access privilege to all Global
Configuration commands.
Console#configure
Console(config)#
To enter the other modes, at the configuration prompt type one of the
following commands. Use the exit or end command to return to the
Privileged Exec mode.
Mode Command
Line line {console | vty}
Access access-list ip standard
Control access-list ip extended
List access-list mac
DHCP ip dhcp pool
Interface interface {ethernet port |
port-channel id| vlan id}
VLAN vlan database
Router router {rip | ospf | dvmrp | pim} Console(config-router)
For example, you can use the following commands to enter interface
configuration mode, and then return to Privileged Exec mode
Console(config)#interface ethernet 1/5
.
.
.
Console(config-if)#exit
Console(config)#
E
NTERING
Prompt
Console(config-line)#
Console(config-std-acl)
Console(config-ext-acl)
Console(config-mac-acl)
Console(config-dhcp)
Console(config-if)#
Console(config-vlan)
C
OMMANDS
Page
4-13
4-74
4-97
4-118
4-162
4-231
4-246
4-291
4-302
4-9