Command Usage; Web Server Commands; Ip Http Port - SMC Networks SMC6724L3 Management Manual

Command Usage

• You cannot set a null password. You will have to enter a password to
change the command mode from Normal Exec to Privileged Exec
with the enable command (page 4-25).
• The encrypted password is required for compatibility with legacy
password settings (i.e., plain text or encrypted) when reading the
configuration file during system bootup or when downloading the
configuration file from a TFTP server. There is no need for you to
manually configure encrypted passwords.
Example
Console(config)#enable password level 15 0 admin
Console(config)#
Related Commands
enable (4-25)

Web Server Commands

Command

ip http port

ip http server
ip http port
Use this command to specify the TCP port number used by the Web
browser interface. Use the no form to use the default port.
Syntax
ip http port port-number
no ip http port
port-number - The TCP port to be used by the browser interface.
(Range: 1-65535)
Function
Specifies the port to be used by the Web
browser interface
Allows the switch to be monitored or
configured from a browser
S M
YSTEM ANAGEMENT
C
OMMANDS
Mode Page
GC 4-35
GC 4-36
4-35