Displaying Neighbor Information - SMC Networks SMC6724L3 Management Manual

Displaying Neighbor Information

You can display all the neighboring PIM-DM routers.
Command Attributes
• Neighbor Address – IP address of the next-hop router.
• Interface – VLAN that is attached to this neighbor.
• Up time – The duration this entry has been active.
• Expire – The time before this entry will be removed.
• Mode – PIM mode used on this interface. (Only Dense Mode is
supported.)
Web – Click Routing Protocol, PIM-DM, Neighbor Information.
CLI – This example displays the only neighboring PIM-DM router.
Console#show ip pim neighbor
Address
--------------- ---------------- -------- -------- -------
10.1.0.253
Console#
VLAN Interface
1
M
ULTICAST
Uptime Expire
613 91
R
OUTING
4-309
Mode
Dense
3-237