Flash-Update-Interval; Prune-Lifetime - SMC Networks SMC6724L3 Management Manual

C L
OMMAND INE
Command Mode
Router Configuration
Example
Console(config-router)#report-interval 90
Console(config-router)#

flash-update-interval

Use this command to specify how often to send trigger updates, which
reflect changes in the network topology. Use the no form to restore the
default value.
Syntax
flash-update-interval seconds
seconds - Interval between sending flash updates when network
topology changes have occurred. (Range: 1-65535)
Default Setting
5 seconds
Command Mode
Router Configuration
Example
Console(config-router)#flash-update-interval 10
Console(config-router)#

prune-lifetime

Use this command to specify how long a prune state will remain in effect
for a multicast tree. Use the no form to restore the default value.
Syntax
prune-lifetime seconds
seconds - Prune state lifetime. (Range: 1-65535)
4-294
I
NTERFACE