Command Usage; Clear Ip Dhcp Binding - SMC Networks SMC6724L3 Management Manual

C L
OMMAND INE

Command Usage

This command identifies a DHCP or BOOTP client to bind to an
address specified in the host command. BOOTP clients cannot
transmit a client identifier. To bind an address to a BOOTP client, you
must associate a hardware address with the host entry.
Example.
Console(config-dhcp)#hardware-address 00-e0-29-94-34-28 ethernet
Console(config-dhcp)#
Related Commands
host (4-113)

clear ip dhcp binding

Use this command to delete an automatic address binding from the DHCP
server database.
Syntax
clear ip dhcp binding {address | *}
• address - The address of the binding to clear.
• * - Clears all automatic bindings.
Default Setting
None
Command Mode
Privileged Exec
Usage Guidelines
• An address specifies the client's IP address. If an asterisk (*) is used as
the address parameter, the DHCP server clears all automatic bindings.
• Use the no host command to delete a manual binding.
• This command is normally used after modifying the address pool, or
after moving DHCP service to another device.
4-116
I
NTERFACE