Ip Igmp Robustval; Ip Igmp Query-Interval - SMC Networks SMC6724L3 Management Manual

ip igmp robustval

Use this command to specify the robustness (i.e., expected packet loss) for
this interface. Use the no form of this command to restore the default
value.
Syntax
ip igmp robustval robust-value
no ip igmp robustval
robust-value - The robustness of this interface. (Range: 1-255)
Default Setting
2
Command Mode
Interface Configuration (VLAN)
Command Usage
The robustness value is used in calculating the appropriate range for
other IGMP variables, such as the Group Membership Interval (ip
igmp last-memb-query-interval, page 4-209), as well as the Other
Querier Present Interval, and the Startup Query Count (RFC 2236).
Example
Console(config-if)#ip igmp robustval 3
Console(config-if)#

ip igmp query-interval

Use this command to configure the frequency at which host query
messages are sent. Use the no form to restore the default.
Syntax
ip igmp query-interval seconds
no ip igmp query-interval
seconds - The frequency at which the switch sends IGMP host-query
messages. (Range: 1-255)
M F
ULTICAST ILTERING
C
OMMANDS
4-207