Clear Counters - SMC Networks SMC6724L3 Management Manual

clear counters

Use this command to clear statistics on an interface.
Syntax
clear counters interface
interface
• ethernet unit/port
• port-channel channel-id (Range: 1-6)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Statistics are only initialized for a power reset. This command sets the
base value for displayed statistics to zero for the current management
session. However, if you log out and back into the management
interface, the statistics displayed will show the absolute value
accumulated since the last power reset.
Example
The following example clears statistics on port 5.
Console#clear counters ethernet 1/5
Console#
- unit - This is device 1.
- port - Port number.
I C
NTERFACE OMMANDS
4-127