Show Rip Globals; Show Ip Rip - SMC Networks SMC6724L3 Management Manual

C L
OMMAND INE

show rip globals

Use this command to display global configuration settings for RIP.
Command Mode
Privileged Exec
Example
Console#show rip globals
RIP Process: Enabled
Update Time in Seconds: 30
Number of Route Change: 0
Number of Queries: 1
Console#
Field
RIP Process
Update Time in
Seconds
Number of Route
Changes
Number of Queries

show ip rip

Use this command to display information about interfaces configured for
RIP.
Syntax
show ip rip {configuration | status | peer}
• configuration - Shows RIP configuration settings for each
interface.
• status - Shows the status of routing messages on each interface.
• peer - Shows information on neighboring routers, along with
information about the last time a route update was received, the RIP
version used by the neighbor, and the status of routing messages
received from this neighbor.
4-242
I
NTERFACE
Description
Indicates if RIP has been enabled or disabled.
The interval at which RIP advertises known route
information. (Default: 30 seconds)
Number of times routing information has changed.
Number of router database queries received by this router.